Welding processes
- MIG (GMAW) — production & heavy plate
- TIG (GTAW) — stainless, aluminum, thin wall
- Stick (SMAW) — field & structural repair
- Aluminum and stainless specialists
Home Capabilities
What we can make for you
Here’s the work we take on. If your job needs something we can’t do, we’ll say so rather than waste your time — and point you somewhere that can.
Capability 01
CNC Milling
Flat and prismatic work — plates, housings, brackets, blocks and fixtures. Pockets, slots, keyways and precision hole work, cut to your print or copied from the part you bring us.
- CNC and manual milling
- Pockets, slots, keyways and contours
- Tapping, boring, reaming and precision hole work
- Manual mills for quick one-offs and rework
| Specification | Capacity |
|---|---|
| Part types | Plates, housings, brackets, blocks, fixtures |
| Features | Pockets, slots, keyways, contours, bosses |
| Hole work | Drilling, tapping, boring, reaming, counterbores |
| Materials | Aluminum, carbon & alloy steel, stainless, brass, plastics |
| Job size | Single part through repeat batches |
| Tolerances | Worked to your print — send it and we’ll confirm |
| Working from | Prints, CAD files, sketches, or a sample part |
| Specification | Capacity |
|---|---|
| Part types | Shafts, bushings, spacers, pins, adapters, fittings |
| Threading | ID and OD, single-point, standard & custom pitches |
| Thread repair | Damaged threads chased, recut or rebuilt |
| Other operations | Facing, boring, grooving, drilling, knurling |
| Materials | Steel, stainless, aluminum, brass, bronze, plastics |
| Job size | One-off repairs through repeat batches |
| Working from | Prints, CAD files, sketches, or the old part |
Capability 02
Turning & Threading Repairs
Shafts, bushings, spacers, fittings, adapters, pins — anything round. This is also where damaged threads get saved: chased, recut or rebuilt, instead of you replacing a whole assembly.
- Damaged threads chased, recut or rebuilt
- Grooving, knurling, drilling and boring
- Custom threads, including metric and pipe
- Repair work on oversize and worn parts
Capability 03
Welding & Fabrication
Weldments, frames, skids, guards, hoppers, chutes and structural repair — then machined on the same floor so critical surfaces stay true after welding.
Forming & cutting
- Shearing and press brake forming
- Horizontal and vertical band saws
- Plasma and oxy-fuel cutting
- Drilling, punching, deburring
Weld-and-machine
- Machined datums after welding
- Bore and face weldment surfaces
- Stress relief through partners
- One vendor, one lead time
Capability 04
Custom & one-off parts
Proof-of-concept pieces, replacements, and the short run you need before committing to anything bigger. If a feature is going to be expensive to machine, we’ll tell you before you pay for it — that advice is free.
- No minimum order quantity
- Practical design feedback at no charge
- Rush turnaround available
- Better pricing on repeat orders
Capability 05
Repeat & batch work
Once a part is proven, we keep the setup and the details on file so the next batch matches the last one. Reorder by name or photo — you don’t have to re-send the drawing every time.
- Setups and details kept on file
- Consistent part-to-part results
- Reorder without re-sending drawings
- Scheduled deliveries by arrangement
Capability 06
Reverse engineering & repair
The manufacturer went out of business, the part is obsolete, and the drawing was lost three owners ago. Bring us what's left of it — we'll measure it, draw it, and make you a new one. Often a better one.
- Parts made from worn or broken samples
- Drawings created and kept on file
- Material upgrades where it makes sense
- Emergency breakdown response
Quality
Measured before it leaves
A part that's out of spec on your bench costs you a day. A part that's out of spec on our bench costs us ten minutes. That's why we check here.
Checked as we go
Critical dimensions get measured during the job, not just at the end — so a problem gets caught while it’s still fixable.
Checked before it leaves
Your part is measured against your print before it’s wrapped. If something is off, you hear it from us first.
Ask for what you need
Need dimensions documented, material information, or a particular inspection? Say so up front and we’ll quote it in.
Materials
What we cut
We source material for you, or run yours if you'd rather supply it. Certifications available on request.
Ferrous
- Carbon steel — 1018, 1045, 1144, A36
- Alloy steel — 4140, 4340, 8620
- Stainless — 303, 304, 316, 416, 17-4 PH
- Tool steel — A2, D2, O1, S7
- Cast & ductile iron
Non-ferrous
- Aluminum — 6061, 7075, 2024, MIC-6 plate
- Brass and bronze — 360, 932 bearing bronze
- Copper — C110
- Titanium — Grade 2, Grade 5
- Inconel, Monel, Hastelloy
Plastics & composites
- Delrin / acetal
- UHMW and nylon
- PEEK, PTFE, PVC, HDPE
- G-10 and phenolic
- Polycarbonate and acrylic
Don't see your material? Ask us — this list is the common stuff, not the limit.
Finishing
In-house and through trusted partners
- Deburring
- Bead blasting
- Tumbling
- Anodizing
- Black oxide
- Zinc plating
- Nickel plating
- Powder coating
- Painting
- Heat treating
- Passivation
- Laser marking & engraving
Outside processes are managed by us — you get one purchase order, one lead time, one invoice, and one person to call.
See a capability that fits your job?
Send the print. We'll confirm we're the right shop for it — and say so if we're not.